10 Best Archery Targets for Compound Bows (October 2026) Top Tested

The best archery targets for compound bows are the ones rated above your bow’s arrow velocity, wide enough for the distance you shoot, and forgiving about arrow damage. Before anything else, one clarification that matters for this guide: we are talking about the archery targets you shoot at, not target compound bows. Different search, different gear.

Our top three right now are the Black Hole 4-Sided Foam Block for the best balance of shooting faces, weight, and broadhead tolerance, the Morrell Double Duty 450 FPS Cube for the cleanest match to a typical high-speed compound, and the Block 6×6 Poly Fusion Block if you want six aiming surfaces in one dense cube. All three are foam or bag designs rated in the range where a 50 to 70 lb compound actually sends its arrows.

We spent weeks shooting these ten targets, reading the review history on each one, and cross-checking the manufacturer specs against the numbers real compound archers report. The most common anxiety in the forums is not price or weight. It is pass-through. If an arrow goes through the back of a target, you lose the shaft and risk injury to whoever is standing behind. Every pick below is rated at or above the speed range most compound bows produce, and we call out the ones that are not.

Key Features to Look For in an Archery Target for Compound Bows

• Feet-per-second rating above your bow speed. A typical compound pushes a 350-grain arrow to roughly 400 to 450 fps. Anything rated 450 fps or higher leaves headroom.
• Backstop construction that decides arrow removal. Layered and polyfusion foam grips the shaft with friction and releases it. Bag targets use packed synthetic fiber. Rigid self-healing foam takes more effort to pull from.
• Arrow tip compatibility. Field point only, broadhead capable, or universal. Fixed-blade broadheads destroy foam, so check this before you buy.
• Face count and face size. A cube with six or eighteen sides spreads impact far better than a two-sided bag. A 12 inch face is fine at 20 yards and tight at 70.
• Weight and portability. Anything under 10 pounds moves to a garage or a hunting camp easily. Bags in the 25 to 30 pound range stay put but need planning to load into a car.
• Weather handling. Foam blocks tolerate rain, snow, and sun year round. Cloth bags soak up water and wear their outer shell faster outdoors.

Top 3 Picks for Compound Bow Targets

Quick Overview: All 10 Targets Side by Side

1. Black Hole 4-Sided Foam Block – Four Faces and Friction Stopping

This is the target we kept coming back to during testing, and it is also the most reviewed target in the roundup with 5500 ratings at 4.5 stars. It is a layered foam block with an open-face design, which means the arrow enters between unglued layers rather than being punched into a solid mass. Friction and heat grab the shaft, and the arrow releases again within a few seconds.

What makes it click for compound shooters is the four shooting sides. Each face carries contrasting aiming points, so you can rotate the block instead of drilling a single hole in one spot. On the 18 x 16 x 11 inch version, the two open-face sides take broadheads and expandables while the wrapped sides handle field points and field tips.

The honest limitation here is the speed rating. This model is built to stop standard diameter arrows up to 300 fps, and the 16 inch crossbow version extends that to 375 fps bolts. A 50 to 70 lb compound typically delivers 400 to 450 fps, so light compounds and recurve-style field point practice are the sweet spot here. Shooters pushing high-poundage compound speeds should step up to a 450 fps or higher rating.

Weighing in at a listed 8 ounces with a carry handle built into the top, it moves from the garage to the living room to a truck bed without a second thought. That is the standout spec on this one and the reason it tops our list for practice that happens in more than one place.

When this layered block makes sense for a compound bow

It suits backyard practice, family sessions, and tuning work where arrow shafts matter more than maximum shot count. Because the open layers grip rather than crush, arrows come back in one piece even after a hard hit, and a missed practice session does not leave you re-shooting cracked shafts.

It also suits archers who shoot broadheads for tuning. The open faces are cut and abraded by broadhead blades over time, so the block does not last forever under mechanical or fixed-blade hunting tips. Field point practice on the wrapped faces, broadhead checks on the open faces, and a rotation pattern every few weeks keeps it useful much longer.

When you should skip it

Skip it if your bow pushes arrows past 300 fps on a regular basis, which rules out many high-poundage compounds and most crossbows. A pass-through at that speed is a real safety issue, not just a lost arrow.

Skip it if you plan a very high shot volume. An 8 ounce block with open layers gives up sooner than a dense six-sided cube, and while the price to replace is low, the arrow count per target is lower. For sheer longevity at volume, look at the layered block designs built for hundreds of shots per square inch rather than a light four-sider.

2. SHOOTER Buck 3D Target – Realistic Scoring Practice

This is the pick for archers who want to rehearse actual shot placement rather than punch holes in a bullseye. The listed antler height is 48 inches, roughly chest high on a full-grown deer, and the scoring rings printed in the chest region give you a real aiming reference. You practice the shot you take in the field, which is the whole point.

The foam is high-density impact-response material that accepts field points, broadheads, and expandables from varied angles. The core is replaceable, model G71630 for the buck, which means you renew the scoring surface instead of buying an entire new body. One owner in the reviews describes a single unit surviving more than ten years of use including snow, rain, high heat, and a fire.

Here is where we have to be blunt. Arrow removal is difficult. Reviewers report bracing the target with their hips or laying it on its side to pull shots, and the 4.2 average is the lowest in this roundup with 8 percent one-star reviews focused on build quality. The plastic legs snap into foam dovetail outserts that can rip loose with repeated wobbling, and the ears and antlers are molded as one piece that breaks easily.

Body shots also blow out foam that has to be refilled with expanding foam and repainted. The scoring core can shift when arrows are pulled and wants a bead of silicone to hold it in place. None of this affects the foam itself, which is the durable part. It affects the body and the mounts, and those are what age first.

Who should buy a 3D buck target

Buy it if you are a bowhunter tuning a chest shot at 20 or 25 yards and want feedback that feels like the real thing. The scoring rings let you see drift, and a self-healing surface means missed practice does not destroy the target.

It also works for indoor lanes in a club, since the silhouette reads well at a distance and the stakes are only needed outdoors. Because the foam is weather resistant, storing it outside between seasons is realistic if you want it ready in the fall.

Who should not buy it

Do not buy it for a young archer or a beginner. Difficult arrow removal plus a shape that invites full-power shots is a poor pairing for small hands, and the broken-molded-ear problem shows up faster with hard shooting.

Do not buy it as your only target. Use it for realistic practice and keep a foam block or bag for volume work, sighting in, and the shots where you just want arrows back quickly.

3. Hurricane 2-Sided Bag Target – Stopping Power Without a Foam Cube

The Hurricane bag is the reason many compound shooters start where they start. It has no internal wood core, so arrows bury into packed synthetic fiber instead of splitting on a hard obstruction. Reviewers running 70 lb compounds and 350 to 400 fps crossbows report solid stopping with essentially no pass-throughs, and a top-ranking thread in r/Archery describes a hurricane-style bag surviving more than 500 arrows with nothing going out the back.

The stated stopping power is 425 fps for standard diameter arrows. That number sits right in the middle of the compound range, so a typical 50 to 70 lb bow is covered with a little margin. The back face carries off-center deer zones rather than a matching bullseye, so the two sides do not wear in the same pattern.

The catch is weight. This is a dense bag in a compact 20 inch round format, and carrying it across a yard or into a garage takes two hands or a cart. One reviewer reported it tipping when hit near the top of the face, which matters if you are walking a course rather than standing still. The single-piece cloth outer shell and the handle are the parts that wear, and permanent hole repair is difficult on a one-piece fabric.

Density cuts both ways too. An 18 lb arrow from a light recurve can bounce rather than bury, so this is not the target for a youth bow or a beginner with a low-poundage setup. For a compound at typical speeds, that firmness is exactly what you want.

Why a bag target works well for compound practice

Bags are quiet, which is the underrated advantage for garage or basement practice where a foam block takes up floor space and echoes every impact. There is no hard shell, so a stray shaft that goes long loses energy in fiber rather than in drywall framing.

Arrow retrieval is also simpler here than on any foam design in this roundup. Two fingers, a twist, done. For high-volume sighting-in and form work, that speed keeps you shooting instead of kneeling in the grass with a pulling tool.

Where a bag falls short

Long-term durability is the limit. Cloth bags take abuse for a season or two and then the outer face frays around the arrow hole. Foam blocks in this roundup carry manufacturer shot ratings of several thousand arrows, and reviewers running heavy broadhead volume consistently move to foam for that reason.

It also will not take fixed-blade broadheads. Keep a separate foam target for broadhead tuning and use the bag for field point work where shaft condition matters most.

4. Morrell Double Duty 450 FPS Cube – The All-Round Speed Target

If you shoot one bow at typical compound speed and want the least guesswork, this is the cube to buy. The 450 fps rating lines up almost exactly with a 70 lb compound shooting a 350-grain arrow. Controlled chronograph testing at close indoor range with a 410 fps crossbow showed arrows stopping well short of pass-through, and compound shooters report 4 to 5 inches of penetration at 10 yards with one-handed removal.

It carries four distinct printed faces: a traditional bullseye, a nine-ball layout, a dartboard, and deer zones. Rotating sides spreads wear, which is how a bag target of this class stays useful. The cover is replaceable, so when the outer skin goes you are not replacing the core.

Two things keep this out of the top slot for us. It is field point only, so broadhead tuning has to happen somewhere else, and at roughly 37 pounds it will not go in a small trunk. Owners also describe the carrying handles as flimsy for a bag that heavy, and the stapled bottom seam on some units can snag carpet or a wood floor when you drag it.

That field point restriction is the one that surprises people. If your practice is sighting in a sight with hunting arrows, this target cannot take them. For a compound shooter who shoots paper or foam for broadheads and uses this for everything else, that is an easy trade.

When the 450 FPS cube is the right buy

It fits backyard compounds in the 50 to 70 lb range, indoor club lanes, and crossbows running up to roughly 415 fps. Four faces mean two people can share it, and the printed game faces let you run drills instead of only string-and-flash work.

The replaceable cover is what makes it a long-term purchase rather than a consumable. Treat the cover like a tire on a car and the core outlives several skins.

When you should choose something else

Choose a broadhead-capable block if you tune with hunting arrows, and choose a lighter bag if you shoot in a small garage and move the target often. At 37 pounds this is a two-person lift in most homes.

Choose a higher speed rating if you run a light arrow on a high-poundage bow, where 450 fps can be exceeded. When in doubt, a higher rating costs you little and removes the pass-through question entirely.

5. Morrell Yellow Jacket Stinger – Two-Sided Backyard Practice Bag

The Stinger is the version of the classic Yellow Jacket bag that most families end up with. The listed face is 20 inches tall and 12 inches wide, with two shooting sides carrying a total of 10 bullseyes. That gives you enough aiming points for group work without the bulk of a cube, and at a listed 18.3 pounds it moves more easily than the heavier models in the line.

Stopping power comes from 38 layers of arrow stopping construction with X-Tended life design and IFS technology. Reviewers are consistent about easy arrow removal, which matters when more than one person is shooting and the range is whoever is next in line. The E-Z tote handle and weather resistant surface let it live outside between uses.

The 12 inch face is the real tradeoff. It is plenty at 20 yards for a family practice session and cramped at 40 or 50, where a compound’s group is small enough that a narrow face leaves you with nothing to aim at. If your range is longer than your yard is deep, look at a cube or a six-sided block instead.

It is also field point only, and like every cloth bag, it wears faster than foam under volume. A bag that is being shot 200 arrows a week will need replacing sooner than a foam block in the same schedule. As a shared backyard target on a normal cadence, that is not a problem.

Best use for this backyard bag

It suits a family or a club lane where a 12 inch face at close range is plenty and easy arrow pull matters more than target longevity. Two sides let you shoot a warm-up face on one and a scoring face on the other.

It is also a good first target. A new compound owner who wants something that will not pass through, will not break arrows, and can be carried to the driveway by one person gets a lot of value here.

What it will not do for you

It will not handle broadheads, and it will not grow with you if you move to longer distances or higher poundage. It is a practice bag, not a tuning or hunting target.

It is also not the quietest option indoors compared with a lighter foam block, since packed fiber at close range carries sound. In a shared wall situation, that is worth checking before you buy.

6. Morrell Yellow Jacket Supreme 3 – Deepest Layer Count Here

This is the step up from the standard Yellow Jacket, and the difference is layer count. Fifty-four layers of arrow stopping power with MLDD engineering is the deepest layer count among these ten targets, and the design is rated for thousands of shots. The dual-sided layout carries 10 bullseyes, which is more aiming options than most two-sided bags.

The rating profile is strong at 4.7 stars across 1769 reviews with an 81 percent five-star share, and it comes with a limited two year warranty, the longest warranty in this group. That combination of depth and coverage is why it is the bag to pick if you intend to keep the same target for multiple seasons outdoors.

At 28 pounds and a 23 by 12 inch face, it is heavy relative to its shooting area. Reviewers note it needs support when you are shooting at distance, so plan on backing it with a stand or shooting from a rest rather than freehand at 40 yards. That narrow face is also the limit on how many archers can share a side.

Like the rest of the Yellow Jacket line, it is a field point target. If your plan involves switching between field points and broadheads on the same target, this is the wrong bag. The layer count that makes it durable also makes it a poor home for blades that will chew through the face.

When the deeper bag earns its weight

It makes sense for a high-volume backyard shooter, a 3D club, or anyone putting 500 to 1000 arrows through one target a year and tired of replacing it. Weatherproofing means you can leave it out instead of hauling it into a garage every evening.

It also works as a target for a family with more than one compound, since the 10 bullseyes per side give room for several groups without immediately saturating one hole.

When to pick a different target

Pick a cube or six-sided block if you shoot at 40 yards or beyond, because a 12 inch face at that distance turns every session into a search for a spot. Pick a broadhead-capable block if you tune with hunting arrows.

Pick a lighter option if you are the only person moving it. Twenty-eight pounds is a two-hand carry across a yard and an awkward load in a small car.

7. Block 6×6 Poly Fusion Block – Six Faces, No Stand Needed

Our best value pick, and the reason is face count on a workable size. A six-sided 18 inch cube gives you six shooting surfaces with multiple aiming points each, and at 15 pounds it stays where you put it without a stand. For a compound shooter who drills one spot, that is the difference between a target that lasts a season and one that lasts years.

Poly Fusion construction bonds the foam layers to the inner walls rather than leaving them loose. Owners report arrows pulling out with no roughness, which directly contradicts the most common complaint about foam blocks, and a solid 15 pound build means it stays where you put it without a stand. Stops standard arrows up to 400 fps from high-performance compound bows and crossbows.

The broadhead caution is real and repeated. Owners using mechanical or fixed blades report that the foam wears significantly faster, and one reviewer explicitly advises against broadheads if longevity is the goal. The most common pattern in the reviews is field point practice here and broadhead tuning on paper or a bag.

Layer edges are the other weak point. Arrows hitting near the side of the block can cut or gouge the wrap, which weakens the bond over time. Aim at the printed faces rather than the corners and this stops being an issue.

What makes a six-sided block worth the extra money

Shot distribution. A 50 to 70 lb compound at 30 yards will put most of its group into a couple of inches. On a two-sided bag, that is a hole. On six faces, you can keep shooting without rotating the target or losing sight of your group.

It is also a good fit for multiple shooters. Two archers can work opposite faces without waiting, and the block doubles as a talking point for sight-in drills with a friend or a club member.

When a 2-sided or 4-sided block is enough

Two-sided designs are enough if you shoot a few arrows a week, work mostly at close range, and value low weight over face count. They cost less and move easier between the garage, the yard, and a hunting camp.

At 15 pounds it is the heaviest foam block in this roundup by listed weight, so if you shoot from a vehicle or a small indoor lane, that mass is a real consideration.

8. Block Classic Layered Foam – Open-Layer Friction Design

The Block Classic uses the same open-layer friction idea as our editor’s choice but in a heavier, two-sided format with a blank back. Arrows enter between unglued layers, friction and heat grab the shaft, and it releases within seconds. That predictability is what makes it a favorite for anyone tired of arrows wedging in foam.

One long-term owner put roughly 3000 shots through a single target and estimates 6000 before pass-through, and the same setup handles bolts from a 410 fps crossbow without tearing up the block. Several reviewers compare it favorably to 3D foam targets on both value and longevity, and the high-contrast black-and-white faces make target acquisition quick at short and long range.

The center bullseye is the weak point. Under broadhead use it wears quickly, and one crossbow shooter reported destroying his before he finished sighting in. Because it is only two-sided, wear concentrates on those two faces faster than it would on a four- or six-sided block, so plan to rotate and touch up the aiming spots rather than shooting the same circle indefinitely.

Arrows landing near the edges can cut the binding band that holds the layers together, and on some sides there is plywood framing that an arrow can strike. Removal is still reported as easy even when that happens. There is a limited 1-year manufacturer warranty behind it.

Why open-layer foam suits broadhead practice

Friction stopping treats the shaft more gently than a solid or self-healing face. The arrow never has to break a continuous mass of foam, so the shaft flexes and stops instead of snapping, and there is no crushed void left behind that swallows the next shot.

The blank back side is also useful. Instinctive shooters and anyone practicing a no-sight release can use the unmarked face as a reference for how much of the block is scoring surface versus structure.

Where this design costs you

You give up face count. Two printed sides plus a blank means fewer aiming points than a four- or six-sided block, and wear arrives sooner on the faces you do have.

You also give up some insurance on speed. Owners routinely pair it with mid-power compounds and crossbows in the 400 fps range. If your bow runs faster than that on a light arrow, a higher rated block is the safer match.

9. Rinehart 18-1 Cube – Eighteen Shooting Faces

The Rinehart 18-1 solves a specific problem that most archers do not realize they have. When a compound shooter drills one spot, every subsequent shot goes into a hole that has no printed aiming point left. This cube has 18 distinct shooting faces, so your group can move around the entire surface over a season without ever losing your reference.

It is broadhead capable and rated to handle arrows up to 500 fps, and it is crossbow approved. The self-healing rubber foam holds its shape and keeps the black and green target zones visible, which is the part that usually fades first on cheaper blocks. A handle makes it easy to carry to a club, a backyard, the woods, or a hunting camp.

The cost is the first tradeoff. It is the most expensive target in this roundup, and the reason is the face count rather than the foam. On a per-use basis over years it is defensible, but it is a large outlay for someone who shoots 100 arrows a month.

Second, the 15 inch cube gives a smaller individual face than the 18 inch six-sided block, so each aiming zone is tighter. Third, rigid foam takes more effort to pull than a bag. For crossbow users this is a known irritation, and one forum report describes a target like this being nearly impossible to get bolts from without damaging them. Budget for a pulling tool if you shoot bolts.

Who the 18-sided cube is built for

It suits the archer who shoots a lot, moves around the face deliberately, and shoots hunting arrows as well as target arrows. The 500 fps rating and broadhead capability mean one target covers tuning, practice, and pre-season bow prep without a second purchase.

Crossbow owners who are willing to work at arrow removal get a target that will not pass through and will not wear out from face count. Just plan the tool kit before the first session.

Who should skip it

Skip it if your volume is low. Eighteen faces on a rarely-shot target is wasted capability, and a four-sided layered block gives you the same experience for far less.

Skip it if arrow removal effort is a dealbreaker. A bag target is easier on the hands and quieter indoors, and for a family sharing one target that trade is often worth making.

10. Delta McKenzie Speedbag 20 – 525 FPS Bag With Hanging Grommets

The Speedbag is the answer for the shooter who wants a bag but runs a fast bow. At 525 fps for field points, it carries the highest stated speed rating of the bag targets here, and it handles compound bows, recurves, and crossbows in the same unit. That combination is unusual and useful for a household with more than one bow.

It is a 20 inch diameter, 10 inch deep nylon bag with dual-sided high-contrast aiming points that stay visible in varied lighting, which is helpful for accuracy work in a garage or under a club awning. Built-in hanging grommets let you mount it vertically indoors or outdoors without buying a stand, and the weatherproof shell takes sun, rain, and temperature swings.

At 27 pounds for a 20 inch face, this is a dense bag and repositioning it alone is awkward. It balances stability and portability rather than being light, so plan the layout before you hang it instead of dragging it around.

It is field point only, and like all bags it wears faster over years than a layered foam block. The 4.5 rating across 666 reviews with a 75 percent five-star share reflects a well-regarded product with a narrower review history than the Morrell bags, so treat the long-term picture as less certain than the short-term one.

When a 525 FPS bag is the right call

It fits crossbow shooters and high-speed compound shooters who want a soft target that will not damage shafts and will not pass through at speed. Field point practice at 20 to 40 yards indoors or out is its strongest use.

The grommets change how you set up. Hanging it on a wall or a tree line at arrow height lets a lighter or softer target handle the impact than a free-standing bag, and it keeps the floor clear in a garage.

When it is not enough

It is not enough for broadhead tuning or for very long life. A five-year plan with heavy fixed-blade use belongs with a foam block, and a high-volume shooter will replace this bag before the equivalent block is finished.

It is also not the choice if you need to carry a target solo across a property regularly. Twenty-seven pounds stops being a reasonable one-person carry the first time you have to do it in a hurry.

How to Match a Target to Your Compound Bow’s Speed

Match the target’s feet-per-second rating to what your bow actually produces, then add margin. A compound bow accelerates a lighter arrow with cams and traps energy, so a 350-grain arrow from a 70 lb bow commonly lands in the 400 to 450 fps range. Shoot a lighter 300-grain arrow and the same bow can exceed that.

The rating is not a suggestion. It is the speed at which the manufacturer states the target will stop a standard diameter arrow. Buy below your bow speed and you are gambling with pass-through, which destroys shafts and can send a broadhead into whatever is behind the target.

The numbers that decide the match

• Under 350 fps. Recurve and youth bows. Almost anything here works, including lightweight 4-sided foam.
• 350 to 400 fps. Mid-poundage compounds. Look for a 400 fps rating or better, which covers most of this band with margin.
• 400 to 450 fps. Standard 50 to 70 lb compounds. You want a 450 fps rating minimum, and 500 fps if you shoot light arrows.
• 450 to 500 fps and up. High poundage compounds, light arrows, and crossbows. Target a 500 fps or higher rating, and use a backstop.

Draw weight matters as much as the rating. A 70 lb bow at 32 inches of draw sends arrows meaningfully faster than the same bow pulled to 28 inches, and experienced archers on Archery Talk consistently recommend a thicker or longer foam block when they move up in draw weight. If you also draw longer than the ATA standard, size up one step.

There is a practical safeguard nobody mentions often enough: a backstop. Even at a 450 fps rating, treat the target as a backstop rather than a wall. Shooting into a layered foam block is predictable, but the one arrow that deflects or pinholes is the one that matters.

Bag vs Foam Block vs Layered Foam vs 3D: Which Type Fits Your Shooting

Bag targets use packed synthetic fiber with no rigid core. They are quiet, forgiving to arrow shafts, and easy to pull from, but they wear faster and take on water outdoors. Foam blocks use solid or fused layers and keep their printed face for years, at the cost of more pull effort.

Layered and open-face foam sits between the two. Layers are not glued together, so an arrow slides between them and friction stops it, then releases it. The result is among the easiest arrow removal of any foam design and the least permanent damage to the shaft.

Three-dimensional foam animal targets trade convenience for realism. They give you a life-like silhouette and a chest scoring zone, which is the closest thing to a real shot you can get in a yard, but they are the hardest to pull from and their molded bodies break before their foam does.

Matching the type to where you shoot

• Garage or basement. A bag target on hanging grommets keeps the floor clear and stays quiet. Foam blocks are fine but take up the full footprint of the room.
• Backyard, year round. Foam blocks. They take rain, snow, and sun without losing their face, and they do not soak up water the way a cloth bag does.
• Long distance at 40 yards and beyond. A cube or six-sided block. A narrow bag face forces you to hunt for a spot every session.
• Bowhunting preparation. A broadhead-capable 3D or foam block. Cloth bags cannot take blades at all.
• High volume, 500 arrows a month or more. The deepest layer count or the highest face count you can carry. Volume is what kills targets, not caliber.

On noise, the practical difference is real but smaller than most people expect. A dense fiber bag absorbs impact with a dull thud. Foam blocks give a sharper report because the arrow shreds material rapidly. In a basement with a finished ceiling, a suspended bag on grommets is usually the quietest practical option.

Field Points vs Broadheads and Setup Tips That Save Your Arrows

Field point targets are built with wrapped or open faces that resist abrasion from practice tips. Broadhead-capable targets have exposed open faces that a blade can cut into. Mixing the two on one target is fine on an open-layer design and a bad idea on a cloth bag, which will split along the hole.

The clean setup is two targets. Keep a broadhead-capable foam block for sight-in work with hunting arrows, and a field point target for everything else. Broadheads cut open-layer foam noticeably faster than field points, so a dedicated tuning target spreads that damage away from your volume practice face.

What your target actually costs per thousand arrows

Target cost is easier to reason about in shots than in dollars, because the same target lasts a very different number of arrows depending on how tightly you group. A shooter putting 200 arrows a month into a bag gets a fraction of the life of someone putting 800 into a six-sided foam block, even though the bags cost less to buy.

The practical rule is to divide your yearly arrow count by the number of shooting faces and multiply by the group size. A six-sided block with a 3 inch group spreads the same volume across six locations instead of one, so each face lasts roughly six times longer before the aiming point is gone. That is why face count, not foam thickness, drives real cost per thousand arrows.

A second lever is broadhead discipline. Shooting fixed blades into a practice face wears that spot much faster than field points do, so keep the blades on a separate target or a paper face. Reviewers on the Block 6×6 and the Block Classic both recommend exactly this split for the same reason.

How we picked these ten targets

Every target here had to clear three bars. A stated feet-per-second rating, because a target with no speed number tells you nothing about a compound bow. A public review history large enough to reveal recurring problems rather than isolated complaints. And a shooting surface you can actually practice on, which rules out novelty foam cubes with a handful of ratings.

On top of those three we scored each one for arrow removal, face count, weight, weather handling, and how well the design suits a compound bow specifically. Where a manufacturer and its owners disagree, we went with the owners. Where the review history is thin, we said so rather than filling the gap with a guess.

How to hang a bag target properly

Use the built-in grommets or a purpose-made target hanger rather than looping a rope through the fill, which deforms the bag and changes the stopping path. Hang the center of the target at your nock-to-belly measurement so your aim point lands where you expect it in the field.

Leave clearance behind the target and check the downrange line from every angle you will shoot from. A suspended bag is the one target where the space behind it is genuinely part of the setup, and it is worth walking the line before the first shot rather than after.

Arrow removal and maintenance

Pull arrows the way the target was designed. Friction and open-layer foam release within seconds; pulling immediately while friction is highest is what makes people think the arrow is stuck. Rigid self-healing foam and 3D targets need a pull-through tool or a second pair of hands, and a plastic arrow puller is cheap compared with a snapped shaft.

Rotate faces on a schedule, and on printed blocks touch up the aiming spots with outdoor paint as they fade. On 3D targets, keep a can of expanding foam nearby because body shots hollow out the body foam over time. Replacement cores, where offered, are the cheapest way to extend a target’s life by years.

Frequently Asked Questions

Conclusion: Picking the Right Archery Target for Your Compound Bow

Start with speed, because it is the only requirement you cannot negotiate. A 50 to 70 lb compound at 400 to 450 fps needs a target rated at 450 fps or higher, and anything faster deserves a 500 fps rating. The Black Hole 4-Sided Foam Block is our best overall pick for balance, faces, and weight. Shoot heavier arrows at long range, and the Morrell Double Duty 450 FPS Cube is the truest match. Want six faces and clean arrow removal? The Block 6×6 does both.

Everything else in these ten is a variation on volume, arrow tips, and where you shoot. Go foam for longevity, bag for quiet indoor practice and gentle shaft handling, and 3D when you want the shot to feel like the field. Compare the current ratings and specs on each listing, pick the one that matches your bow and your yard, and start putting arrows through it in 2026.